Slim, Space-saving, RT-3 Unit relay (Equipped with long-life PhotoMOS power type)
RT-3 Unit relay
(PhotoMOS Power type)
4-point Terminal
(Without relay type)
Mountable relay
PhotoMOS Power type
No foreign certifications are acquired as of now.
Please refer to “the latest product specifications” when designing your product.
Please refer to “Cautions For Use” in the catalog, and “Related Information” on our website.
Features
1.Slim shape with width of 33 mm
2.PhotoMOS Power type, for high reliability and long life, are installed.
3.Can be mounted on a DIN rail or mounted directly by screw.
4.Equipped with an LED display to allow easy confirmation of operation.
5.Possible to select a relay for use in the 4-point terminal in accordance with its load.
Part Number
RT-3 Unit relay (PhotoMOS Power type)
| Contact arrangement | Type | Rated Input voltage | Type No. | Part No. | Standard packing | |
|---|---|---|---|---|---|---|
| Inner carton | Outer carton | |||||
| 1 Form A x 4 | DC only (Equipped with AQZ102) |
12 V DC | RT3SP1-12V | AY34001 | 1 pc. | 20 pcs. |
| 24 V DC | RT3SP1-24V | AY34002 | ||||
| AC/DC dual use (Equipped with AQZ204) |
12 V DC | RT3SP2-12V | AY35001 | |||
| 24 V DC | RT3SP2-24V | AY35002 | ||||
Notes) 1: 4 pieces PhotoMOS Power types are installed. Cannot be equipped with PA-N relays.
2: For other contact arrangement, please contact our sales representative.
4-point Terminal (Without relay type)
| Type | Rated Input voltage | Type No. | Part No. | Standard packing | |
|---|---|---|---|---|---|
| Inner carton | Outer carton | ||||
| Without relay type | 12 V DC | RT3BB-12V | AY30001 | 1 pc. | 20 pcs. |
| 24 V DC | RT3BB-24V | AY30002 | |||
Note) Relay sold separately. Please refer to the following for the relays that can be mounted
Mountable relays for 4-point Terminal
(per relay, at 25°C, initial)
| Mountable relays | Output | ||||
|---|---|---|---|---|---|
| Type | Part No. | Max. load voltage | Recommended load voltage | Continuous load current | Peak load current |
| PhotoMOS Power type (DC only) |
AQZ102 | 60 V DC | 0 to 30 V DC | 2.00 A | 9.0 A |
| AQZ105 | 100 V DC | 0 to 50 V DC | 1.50 A | 6.0 A | |
| AQZ107 | 200 V DC | 0 to 100 V DC | 0.70 A | 3.0 A | |
| AQZ104 | 400 V DC | 0 to 200 V DC | 0.40 A | 1.5 A | |
| PhotoMOS Power type (AC/DC dual use) |
AQZ202 | 60 V (peak) | 0 to 12 V AC / 0 to 30 V DC | 1.80 A | 9.0 A |
| AQZ205 | 100 V (peak) | 0 to 24 V AC / 0 to 50 V DC | 1.20 A | 6.0 A | |
| AQZ207 | 200 V (peak) | 0 to 48 V AC / 0 to 100 V DC | 0.60 A | 3.0 A | |
| AQZ204 | 400 V (peak) | 0 to 125 V AC / 0 to 200 V DC | 0.30 A | 1.5 A | |
| AQZ404 (1 Form B type) | 400 V (peak) | 0 to 125 V AC / 0 to 200 V DC | 0.30 A | 1.5 A | |
Notes: 1. Peak load current is limited to “100 ms, 1 shot”.
2. During 4-point simultaneous operation, the rating per point is also as shown in the table above.
3. Please use a load current that is within the range of the data given below in “REFERENCE DATA Load current vs. ambient temperature characteristics”.
4. Be very careful regarding the polarity on the output side when equipped with AQZ10* (dedicated PhotoMOS power voltage sensitive DC type).
5. Never install relays into this product other than those given above. Doing so will cause malfunction, breakdown, and breakdown of the connected product.