Miniature-sized and still mountable with M3 screws
UL/C-UL , CE , Korean S Mark Approved
UL : Recognition
Korea’s S-mark certification : NPN output type only
Features
Three protection circuits standard on all models
All models are standardly equipped with the following protection circuits in their compact bodies. These protection circuits minimize the possibility of sensor malfunctions caused by erroneous wiring.
①.Reverse supply polarity protection circuit
②.Reverse output polarity protection circuit
③.Output short-circuit protection circuit
Ample beam emitting / receiving distance of 6 mm 0.236 in
The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than those on our conventional models while their external dimensions are the same. As a result, the distance between the beam emitting point and receiving point increased by 1 mm 0.039 in. The wider distance means less possibility of collision between the sensing section and sensing object.
(Unit: mm in)
Note : The above image is PM-K45.
Beam marks for easy adjustment
The upper-limit and lower-limit positions of beam can be visually confirmed from the front, back, right and left sides of the sensor unit. This allows easy adjustment of the position of sensing object.
Note : The above image is PM-K45.
Large and easy to see
Multi-angle operation indicator
The large operation indicator (orange) lights up when the beam enters. The indicator is easy to see from above and from the sides.
All models easy to mount with M3 screws
The sensor unit can be installed with one or two M3 screws.。
(M3 screws and washers are not included.)
■Models requiring one M3 screw for installation : PM-F65, PM-R65
■Models requiring two M3 screws for installation : Models other than above
Resistant to vibrations and impacts
The sections where stress concentrates, such as the connecting section of the cable and internal circuit, are covered with a resin. This helps prevent malfunctions caused by vibrations and impacts.
Order guide
Compact / Connector built-in type
| Type | Appearance (mm in) |
Sensing range | Model No. | Output | Output operation |
|---|---|---|---|---|---|
| K type |  |
6 mm 0.236 in (fixed) |
PM-K65 | NPN open-collector transistor |
Incorporated with 2 outputs: Light-ON / Dark-ON |
| PM-K65-P | PNP open-collector transistor |
||||
| T type |  |
PM-T65 | NPN open-collector transistor |
||
| PM-T65-P | PNP open-collector transistor |
||||
 |
PM-T65W | NPN open-collector transistor |
|||
| PM-T65W-P | PNP open-collector transistor |
||||
| L type |  |
PM-L65 | NPN open-collector transistor |
||
| PM-L65-P | PNP open-collector transistor |
||||
| Y type |  |
PM-Y65 | NPN open-collector transistor |
||
| PM-Y65-P | PNP open-collector transistor |
||||
| F type |  |
PM-F65 | NPN open-collector transistor |
||
| PM-F65-P | PNP open-collector transistor |
||||
 |
PM-F65W | NPN open-collector transistor |
|||
| PM-F65W-P | PNP open-collector transistor |
||||
| R type |  |
PM-R65 | NPN open-collector transistor |
||
| PM-R65-P | PNP open-collector transistor |
||||
 |
PM-R65W | NPN open-collector transistor |
|||
| PM-R65W-P | PNP open-collector transistor |