Digital Pressure Sensor [For Gas] DP-0

Simple and easy operation
Redesigned for improvement of pressure sensor usability from ground up

CE Approved
CE : EMC Directive

Movie Library

Simple & easy operation

Two levels of configuration for easy operation of essential functions
The “RUN mode” is for setting the threshold value, the zero point adjustment and key lock/release setting, and the “detailed configuration” allows the basic settings of sensor operation. The two-level configuration enables an easy and immediate use of the product.

Main menu for detailed configuration

Operation setting mode*

Select from EASY mode, hysteresis mode or window comparator mode.

NO / NC setting mode

Set the comparative output operation to NO or NC.

Response time setting mode

Select the response time from 2.5 ms, 25 ms or 250 ms.

Display color setting mode

Select the comparative output ON / OFF display color and the normal display color from red or white.

Functional design

Black body for enhanced visibility of LCD display
The unit body is completely black to make the LCD display easier to see.

Firm and crisp clicking feel
The buttons offer firm and crisp clicking feel for smooth and reliable setting operations.

High-quality LCD display

Simple and highly visible display
The LCD offers a wide viewing angle so the display is easy to see even from an oblique angle. The
alphanumeric display (12-segment display), the key lock mark and the OVER mark are also clear and easy to see.

Selection of display color from red or white
The display color can be selected from red or white in accordance with the output operation. Since the detailed setting mode display is pink (unchangeable), the pressure sensor status can be easily recognized by color.

Compact & light weight design

Extra-short depth and light weight
The unit body measures only 24.9 mm 0.980 in in depth to allow installation in a narrow space. The main unit weighs only about 25 g. The lightweight unit means minimal load when mounted on a moving part such as a robot arm.

Low pressure type and high pressure type available

12 segments are used and an alphanumeric display has been adopted. This improves visual checking of letters and numbers.

Equipped with three output modes for use in a wide range of applications

(1)EASY mode
This mode is used for comparative output ON / OFF control.

H: 4 digits (fixed) (10 digits or more when using psi unit)

(2)Hysteresis mode
This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.

H: 2 digits or more (5 digits or more when using psi unit)

(3)Window comparator mode
This mode is used for setting comparative output ON and OFF at pressures within the setting range.

H: 4 digits or more (10 digits or more when using psi unit)

Panel mounting bracket

Tight installation is possible
An exclusive mounting bracket that is suitable for 1 to 3 mm 0.039 to 0.118 in panel thickness is available.

Exclusive mounting bracket

Supports tight installation
Space savings can also be achieved even when an L-shaped mounting bracket is used.

Connection cable

Cable can be connected with one-touch
Connector attached cable (2 m 6.562 ft), as an accessory, can be connected easily with one-touch connection.

* Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft types are also available.

Types without connector attached cable are also available [DP-00□-J]
Commercially-available connectors can be used for cable connections. Cables in required length can be used, so this contributes to reduction in waste of unwanted cables.

* Refer to Option for recommended commercially-available connectors.