Eight types of mounting stands enable installation of sensors,
fibers, and reflectors at any desired position
Features
Easy adjustment of sensing position
Even after mounting a sensor, you can adjust the sensor easily.
Note: The elevation angle is ±20° for MS-AJ□-F (assembly for fiber).
Mountable on vertical or horizontal plane
MS-AJ1(-□)
Securely fixed with two M6 screws
Cable can be neatly threaded into pipe
Eight models
MS-AJ□ (Basic assembly)
It is used to mount CX-400, LS, EX-40 and EZ-10 series sensors, and the RF-210 reflector.
MS-AJ□-A (Lateral arm assembly)
A lateral arm is added to the MS-AJ□ basic assembly. Sensing is possible from above an assembly line.
MS-AJ□-M (Assembly for reflector)
The MS-AJ□ basic assembly is modified to mount a reflector. It can be used for RF-220 and RF-230 reflectors.
MS-AJ□-F (Assembly for fiber)
The sensor mounting bracket of MS-AJ□-A is replaced with a fiber mounting bracket. It can be used with FD-L51, FD-L52, FD-L53, FD-L54 and M3, M4 or M6 threaded head fibers.
Order guide
Amplifiers
| Type | Appearance | Model No. | Applicable sensor, reflector and fiber |
|
|---|---|---|---|---|
| Basic assembly | Horizontal mounting type |
 |
MS-AJ1 | CX-400 series CX-L400 series LS series EQ-20 series (Note) EX-40 series EZ-10 series RF-210 (Reflector) |
| Vertical mounting type |
MS-AJ2 | |||
| Lateral arm assembly |
Horizontal mounting type |
 |
MS-AJ1-A | |
| Vertical mounting type |
MS-AJ2-A | |||
| Assembly for reflector |
Horizontal mounting type |
 |
MS-AJ1-M | RF-220 (Reflector) RF-230 (Reflector) |
| Vertical mounting type |
MS-AJ2-M | |||
| Assembly for fiber |
Horizontal mounting type |
 |
MS-AJ1-F | FD-L51 (Fiber) FD-L52 (Fiber) FD-L53 (Fiber) FD-L54 (Fiber) M3, M4 and M6 threaded head fibers |
| Vertical mounting type |
MS-AJ2-F | |||
Note: The EQ-20 series was discontinued in December 2005.
Individual components are also available as follows
| Designation | Appearance | Model No. |
|---|---|---|
| Sensor mounting unit |  |
MS-AJS |
| Reflector mounting unit |  |
MS-AJR |
| Reflector mounting bracket |  |
MS-AJ-R1 |
| Fiber mounting unit |  |
MS-AJD |
| Fiber mounting bracket |  |
MS-FD-1 |
| Arm joint unit |  |
MS-AJL |
| Base unit (Horizontal mounting type) |
 |
MS-AJ1B |
| Base unit (Vertical mounting type) |
 |
MS-AJ2B |
| Cable guide |  |
MS-AJG |
| Arm (Pipe) |  |
MS-AJP |
| Discontinued product | Recommended substitute | ||||
|---|---|---|---|---|---|
| Product number/Part number | Last time buy | Product number/Part number | Product name | Remark | |
| Product number: MS-AJ Part number: MS-AJ |
August 31, 2003 To be discontinued |
 |
Product number:
– Part number: MS-AJ1,MS-AJ2
|
Universal Sensor Mounting Stand MS-AJ
|
Suggested alternative products may be different under the conditions of use.
|
| Product number: MS-AJ-A Part number: MS-AJ-A |
August 31, 2003 To be discontinued |
|
Product number:
– Part number: MS-AJ1-A,MS-AJ2-A
|
Universal Sensor Mounting Stand MS-AJ
|
Suggested alternative products may be different under the conditions of use.
|
| Product number: MS-AJ-F Part number: MS-AJ-F |
August 31, 2003 To be discontinued |
|
Product number:
– Part number: MS-AJ1-F,MS-AJ2-F
|
Universal Sensor Mounting Stand MS-AJ
|
Suggested alternative products may be different under the conditions of use.
|
| Product number: MS-AJ-M Part number: MS-AJ-M |
August 31, 2003 To be discontinued |
|
Product number:
– Part number: MS-AJ1-M,MS-AJ2-M
|
Universal Sensor Mounting Stand MS-AJ
|
Suggested alternative products may be different under the conditions of use.
|
| Product number: MS-AJB Part number: MS-AJB |
August 31, 2003 To be discontinued |
|
Product number:
– Part number: MS-AJ1B,MS-AJ2B
|
Universal Sensor Mounting Stand MS-AJ
|
Suggested alternative products may be different under the conditions of use.
|